3 layer Corrugated carton production line
The Machine technique parameter:
Max. paper width: | 1600mm |
Max. Width of corrugating roll | 1670mm |
Max. speed of machine | 100m/min |
Flute TYPE: | Flute type according to client request |
Steam consumption: 2000kg/hour Working. pressure: 1.0—1.1MPa Max. pressure: 1.3Mpa |
Power requested: | 380V,50Hz,3-phase |
Total power: | About 100kw for general condition |
Total length of line: | 35 meters. |
1.Electric Shaftless Mill Roll Stand
Technical Parameters
* Operation style of base paper stand: Electrically mechanical type
* Dia. of clip paper: Φ350mm - Φ1400mm
* Max. weight of one side: 2000kg
* Working pressure of air supply: 0.6-0.9 MPa
* Total power: 5.2kw
Structural Features
A. The symmetric structure can be installed with two bundles of
base paper at the same time used to change papers without halt.
B. This machine adopts the electrical driver to finish lifting up
or down, clamping, loosening and centering the base paper.
C. This machine adopts the pneumatic tension controller to adjust
the tensile force of base paper.
D. The head of clip paper adopts expansion style.
E. The tension control adopts pneumatic braking, which can also be
on-line control together with Paper Splicer.
Max. working width | 1600mm |
Max working steam pressure: | 1.0-1.3Mpa |
Steam temperature | 160—210 centigrade |
Power requirements: | 380V, 50Hz |
Diameter of heating roller | 400mm |
2.High Speed Fingerless Type Single Facer
Specification:
Max. machine speed | 80m/min |
Economic speed | 60m/min |
Max. working width | 1600mm |
Max working steam pressure: | 1.0-1.3Mpa |
Steam temperature | 160—210 centigrade |
Power requirements: | 380V, 50Hz |
Diameter of corrugated roller | 268mm |
Diameter of Press roller . | 268mm. |
Diameter of preheater roller | 280mm |
Diameter of Glue roller | 215mm |
Diameter of doctor roller | 105mm |
*Design speed: 80m/min.
*Corrugated rollers made of 48CrMo alloy steel, with heat treatment
for hardness HRC58-60, surface plated with chrome treatment.
*corrugating roller: Dia.280mm with a drum.
*Press roller: Dia.320mm. with drum.
* Vacuum suction Fingerless design provides perfect flute formation
in high speed manufacturing.
* Gimbal driver system. Individual immersion oil gear type drive
box, separating dynamic vibrations improve running stability, easy
and fast for maintenance
*Gluing roller: surface is embossed with netting design and chrome
plated.
*Adjustment of upper corrugated roller, pressure roller and glue
roller controlled by pneumatic system.
*With preheating and preconditioning rollers.
3.Overhead Bridge
Vacuum tension control ,Electric paper way control.
4.Single ply Gluing Machine For Three ply Line With PLC & Auto Adjust Glue
Packaging
1. Fixed all the movable parts with plastic films.
2. Polystyrene foam plate wrapped around.
3. Wrapped with tighted plastic films several circles.
4. Fixed machine on the fumigated plywood pallet with iron wire.
5. Wrapped with wooden board around and nailed on.
Shipments
1 sea transportation is from qingdao seaports or other ports.
2 the delivery time is decided by your needed machines or machine
parts. But it also follows your needs.
